WARTUNG
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
15
ZI-STE1200IV
7.3
Motorölwechsel
A C H T U N G
Vor Motorölwechsel Maschine ausschalten!
Das alte Motoröl schnell und komplett ablassen, während der Motor noch warm ist.
Im Sinne des Umweltschutzes Altöl in dichten Behältern bei zugelassenen Sammelstellen abgeben.
Entsorgen Sie es nicht mit dem Hausmüll
Öffnen Sie den Motoröltankverschluss (3), kippen Sie die Maschine
und lassen Sie das Altöl in einen geeigneten Behälter laufen.
Füllen Sie neues Motoröl (15W40, 260ml) ein (2) und verschließen
Sie die Motoröltanköffnung wieder.
Entfernen Sie Ölreste mit einem Tuch.
Stellen Sie die Maschine auf eine ebene Fläche und starten Sie den
Motor. Bei ausreichendem Ölstand wird der Ölwarnsensor (1) nicht
aktiviert.
7.4
Luftfilter
Lösen Sie die Schrauben und
entfernen Sie den Luftfilterabdeckung
(1)
Entfernen Sie den Luftfilter (2)
Reinigen Sie den Luftfilter mit
Seifenwasser, spülen ihn
anschließend mit klarem Wasser und
lassen ihn vor erneutem Einbau gut
trocknen.
Der Zusammenbau erfolgt in
umgekehrter Reihenfolge
7.5
Zündkerze
Ziehen Sie den Zündkerzenstecker (1) mit
einer Drehbewegung ab.
Entfernen Sie die Zündkerze (2) mit einem
Zündkerzenschlüssel (3).
Überprüfen Sie die Zündkerze auf
Verschmutzung und reinigen Sie diese
gegebenenfalls mit einer Kupferdrahtbürste.
Elektrodenabstand (0,6 -0,7mm) prüfen
Der Zusammenbau erfolgt in umgekehrter
Reihenfolge