TROUBLE SHOOTING
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite 36
HOLZSPALTER / LOG SPLITTER ZI-HS8PT / ZI-HS10T / ZI-HS12T
15.3
Storage
Log splitter never outdoors camps!
Storage permitted only at temperatures b5 ° and +40 ° Celsius, which at +40 ° Celsius,
the humidity should not be higher than 60%. Store in a dry and clean place.
15.4
Disposal
Do not throw away the log splitter in the residual waste. Contact your local
authorities for information regarding the available disposal options. When you
buy at your local dealer for a replacement unit, the latter is obliged to ex-
change your old.
16
TROUBLE SHOOTING
Before you begin working for the elimination of defects, disconnect the machine from
the power supply.
Problem
Possible cause
Solution
Engine will not
start
ON / OFF switch is not
turned on.
Check the on / off switch and make sure
it is switched to "ON".
Extension cable is defecti-
ve.
Unplugging, check with the other ma-
chine.
Incorrect power supply
(voltage, frequency).
Power supply adjust to requirements of
Specifications Operating voltage.
ON / OFF switch is defec-
tive.
This please leave control of electrician for
replacement if defective.
Incorrect motor
rotation directi-
on
incorrect connection
Rev. turn (with screwdriver) (electrician)
Reverse polarity (electrician)
Cleaver does not
move, although
the motor is
running
Valve is not open, caused
by loose connection
Fix the loose parts
MUCH TOO LOW OIL
LEVEL!
Add oil to fill bottom lip. Can check
whether you have already damaged the
hydraulic system (especially pump). War-
ranty is excluded.
Wood splitter
works, but with
atypical noise
and vibration
Oil level too low.
FILLER PLUG DURING
OPERATION CLOSED
Öl nachfüllen!
Sofort abstellen
,
