OPERATING
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite 33
HOLZSPALTER / LOG SPLITTER ZI-HS8PT / ZI-HS10T / ZI-HS12T
If there should not move up after turning on the machine, the riving knife , turn the machine
off immediately. Poland it all the engine with a screwdriver in order . If you have this no ade-
quate training, they agree necessarily an electrician .
14
OPERATING
14.1
operating Notes
14.2
Operation
Before you begin working, check the functionality of the log splitter, by performing the following
steps.
Turn the machine on by pressing the on-off switch from "I".
Press the two levers down. Thereupon, the riving knife must move down.
If you release one of the two levers is the riving knife in the instantaneous position.
When you release both levers, the riving knife automatically moves upwards.
Keep the log with the two levers, so that a stable state of the wood is guaranteed. Then move
the two levers down to split the wood. If you release one of the two levers, stop the splitting
wedge. When you release both levers, the riving knife automatically moves to the highest posi-
tion.
Create the split wood parts immediately from the work area and stack them if necessary. This
will reduce accidents at work.
ATTTENTION!
NEVER START THE ENGINE IN THE WRONG DIRECTION RUN!
THIS INEVITABLY FOR DESTRUCTION OF THE PUMP SYSTEMS AND PURPOSE IS NO
GUARANTEE IS CLAIMED.
ATTENTION!
More columns the wood in the direction of the wood grain. Place the wood never
against a fibration, because that can lead to significant damage to the mechanical and
the hydraulic system.
ATTENTION!
Piled wood columns, and wood chips are a source of danger. Always keep the
environment clean, so you can not slip.
