SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
19
ZI-ZWM100 / ZI-ZWM120
12
SAFETY
This section contains information and important notes on safe start-up and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hazard information!
12.1
Intended use of the machine
The machinery is intended exclusively for the following operations:
for the production of
concrete, mortar and plaster.
ZIPPER-MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
12.1.1
Technical restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
max. 70 %
Temperature (Operation)
+5° C bis +40° C
Temperature (Storage, Transport)
-20° C bis +50° C
12.1.2
Verbotene Anwendungen / Gefährliche Fehlanwendungen
-
Operating the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine outside the technical limits specified in this manual
-
Remove the safety markings attached to the machine
-
Modify, circumvent or disable the safety devices of the machine
-
Mixing explosive, flammable and harmful substances
The improper use or disregard of the versions and instructions described in this manual will
result in the voiding of all warranty and compensation claims against Zipper Maschinen GmbH.
12.2
User requirements
The machine is designed for operation by one person. The physical and mental aptitude as well
as knowledge and understanding of the operating instructions are prerequisites for operating
the machine. Persons who, because of their physical, sensory or mental abilities or their
inexperience or ignorance, are unable to operate the machinery safely must not use it without
supervision or instruction from a responsible person.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
