TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
22
ZI-ZWM100 / ZI-ZWM120
13
TRANSPORT
Transport
For transport over shorter distances (at the construction site) tilt the machine until it stands on
the two larger wheels. The machine can be moved using the transport handles.
Transport of the machine with a vehicle
•
Fix the protective grille with the rubber lock (1).
•
By tilting the machine, it can be easily loaded or
unloaded onto vehicle cargo beds using the small
transport wheels (2).
•
On the cargo bed, carefully store the machine on
its four wheels.
•
Secure the machine with tension belts against
unintentional slipping.
14
ASSEMBLY
14.1
Checking delivery content
Always note visible transport damages on the delivery note and check the machine
immediately after unpacking for transport damage or missing or damaged parts. Report any
damage to the machine or missing parts immediately to your retailer or freight forwarder.
14.2
The workplace
Place the machine on a solid, flat surface. The space required by the machine and the required
load-bearing capacity of the subfloor result from the technical data (dimensions, weight) of
your machine. When designing the working area around the machine, observe the local safety
regulations. When dimensioning the required space, take into account that the operation of the
machine must be possible without restrictions at all times. The selected installation location
must ensure a suitable connection to the electrical mains.
14.3
Electrical connection
W A R N I N G
Dangerous electrical voltage!
The machine may only be connected to the mains
supply and the associated checks carried out by a qualified electrician or under the
instruction and supervision of a qualified electrician!
1. Check that the neutral connection and protective earthing are functioning properly
2. Check that the supply voltage and frequency correspond to the specifications of the machine
