SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
17
ZI-WP700T
11
SAFETY
11.1
Intended Use
The ZIPPER Concrete cutter ZI-WP700T must be operated for cutting round timber, logs and other
woody materials exclusively without nails.
Unauthorised modifications and tampering with the machine immediately invalidate all warranty and
compensation claims.
The improper use or non-compliance with regulations and notices set forth in this manual will void
all claims for damages against the ZIPPER GmbH result.
Unauthorised modifications and tampering with the machine also immediately invalidate all warranty
and compensation claims.
The machine may only be operated by qualified personnel enrolled.
Unauthorized, in particular children, and not enrolees persons must be kept away from
the work environment!
The machine may only be operated outdoors in a well ventilated area.
Before carrying out maintenance or adjustment work the machine must be disconnected
from the power supply!
Use the power cord plugged never for transportation or manipulation of the machine!
11.2
Safety
Warning signs and / or labels on the machine that are illegible or have been removed are to be
replaced immediately!
The most important factor for adequate security at work is common sense. Care and good judgment
are the best protection against injury. This list of general safety information does not purport to
include all possible sources of danger, but we have tried to highlight some of the important details.
Individuals should look for caution, warning and danger signs that are marked on the device and
displayed at work and read the safety, understand and heed.
With fatigue, lack of concentration or under the influence of medicines, alcohol or
drugs that work on the machine is prohibited!
Before each use, check machine in perfect condition! Oil level, blade condition, tight-
ness screws etc ...
The regular maintenance and inspection is safety critical.
