TROUBLESHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-WP700T
15
TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Possible Cause
Solution
Once the power supply and
press the power switch, the
machine switches off imme-
diately
(Switch does not hold).
It lacks the network side, the
neutral line
Be remedied by a licensed master
electrician.
Warning:
The blocking of the control button to
work despite the lack of neutral line
can be destroyed by a short time the
switch.
We assume in this case, no Warran-
ty.
The motor of the machine
hums and does not come up
to speed.
Check fuses
If necessary, replace blown fuses.
Saw does not brake from
turning off.
Brake switch defective
Replace brake (electrician consult)
16
ELEKTRISCHE SCHALTUNGEN / WIRING DIAGRAM
