ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
35
ZI-RWM84
17
ASSEMBLY
17.1
Checking scope of delivery
Check the machine immediately after delivery for transport damage and missing parts..
17.2
Setting up the device
Place the machine on a solid surface. A concrete floor is the best foundation for the machine. The
space required by the machine and the required load capacity of the ground result from the
technical data (dimensions, weight) of your machine. Observe the local safety regulations when
designing the working area around the machine. When dimensioning the required space, take into
account that operation, maintenance and repair of the machine must be possible at all times
without restriction. The selected installation site must ensure a suitable connection to the electrical
mains.
17.3
Assembly
1.
Assembly thread-shaft
Attach the threaded shaft (2) to the drive shaft
(1) using the screw (3).
2.
Assembly cone
Slide a cone (4) and the clamping cover (5) onto
the threaded shaft and loosely tighten the quick
release nut (6).
NOTCE:
The threaded shaft is removable to allow
the assembly of alternative adapters, e.g. for
motorcycle wheels.
