ZIPPER MASCHINEN 9120039232898, Руководство пользователя

Страница: 31 / 38

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  30
ZI-HEK40V-AKKU
 Keep the machine, in particular its plastic components, away from brake fluids, petrol, petroleum
products, penetrating oil, etc. They contain chemical substances which may damage, attack or
destroy the plastic components of the machine.
 Fertilisers and other garden chemicals contain substances which may have a highly corrosive effect
on the metal parts of the machine. Therefore do not store your machine near these substances.
15.4 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.
16 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY!
Trouble Possible cause Solution
Motor does not start  Battery is not plugged in  plug in battery
 Battery is not charged  Recharge battery
 Safety switch is damaged  Check safety switch
 Power switch is damaged  Check safety switch
Unusual, loud noises and
excessive vibrations
 Loosen cutting tool  Tighten cutting tool
 Debris on the cutting tool  Remove derbies
 Cutting tool damaged  Change cutting tool
Poor cutting result  Blunt cutting tool  Change cutting tool
 Chain tension  Check chain tension
Blades becomes hot  Low lubricant  Oil the cutter bar
Battery cannot charged
anymore
 Contact failure  Check contact pins
 Battery damaged  Change battery
N O T I C E
Should you in necessary repairs not able to properly to perform or you have not
the prescribed training for it always attract a workshop to fix the problem.
Autogoods “130”
130.com.ua