5
STRUCTURAL AS
SEMBLY
1. Gutter Clip Installation
Fasten two gutter clips to the back of both the top and bottom gutters. Use three bolts, lock washers, and
nuts to secure each clip - place the lock washers and nuts on the inside of each gutter.
The clips should be oriented with the holes up and flush against the gutter. When placed properly the top
half of the clip (the half with the holes) will lay flat against the gutter while the bottom half bends away
creating space for the wall channel.
2. Tower Support (V’s) Installation
4-Tower Farm Walls include two Tower Supports. 8-Tower Farm Walls include four Tower Supports. Tower
Supports must be oriented correctly inside the bottom gutter to ensure proper function of your ZipGrow
Farm Wall. The diagram below shows the correct position of each bow tie inside each gutter. Align the
edges of Tower Supports to match the arrows to find the correct placement for the 4-Tower Farm Wall
(left) and 8-Tower Farm Wall (right).
Note:
The top gutter of a 4-Tower Farm Wall is drilled
with an extra hole on the back. Fasten one bolt,
washer, and nut through this hole. The top gutter will
have to slide onto the wall channel for mounting.
Note:
We highly recommend using gloves when installing the gutter clips, bow ties, and PVC pipe to avoid
any potential cuts.
(Example 4-tower gutter)
