Page 10 of 12
Zip CH103, CH104 - Installation & operating instructions - 82127UK - June 2015 v1.04
Service
Cleaning
Cleaning
Never use strong, corrosive or abrasive cleaning materials on the Zip ChillTap
®
,Wall Fountain or under counter chiller unit. Wipe clean the outer surfaces with
a sponge or a soft cloth using a mild soap and water.
The louvres on the sides of the chiller unit and the Wall Fountain cabinet need
to be kept free of dust and lint to permit free flow of air through the vents. They
should be checked regularly, at least monthly, and dusted or vacuumed.
Service
There are no user serviceable parts but there are dangerous voltages present
within the under counter chiller unit. All service work must only be carried out
by a suitably qualified and experienced trades-person.
Before calling for service, check that both the water and electricity supplies are
turned on and functional.
Call Zip, a qualified electrician or plumber for assistance, service, spare parts,
or enquiries.
Zip customer service 0845 6 005 005, 0345 6 005 005.
Filter replacement
continued
free as water may spill out.
•
Write the date of replacement on the new filter cartridge label.
• Remove the protective plastic cap. The insertion method is the opposite to
the removal method. Align the tabs of the replacement cartridge with the
filter head and insert it up into the filter head.
• Turn the replacement cartridge a quarter turn anti-clockwise until it stops
and locks into position.
•
When the filter replacement has been completed, purge the system of
trapped air by dispense water from the tap until it flows without any further
spluttering. Run the water for at least 2 minutes more to complete the
purge.
•
For the CH104 refit the front louvred panel, clean any marks on the
stainless steel surface, wipe dry any water spills.
