Page 3 of 12
Zip CH103, CH104 - Installation & operating instructions - 82127UK - June 2015 v1.04
Safety information
continued
Concealed filtered water chiller with heavy duty lever action tap.
Delivers 140 glasses per hour of chilled filtered water within the operating range
of 5ºC to 10ºC.
15mm compression fitting connecting to mains water supply.
A potable water supply is required with minimum water pressure of 0.17 MPa (1.7
bar). If the incoming mains cold water supply pressure exceeds 0.7 MPa (7.0
bar) a pressure reducing valve is required to be fitted in the supply line. (See
Spare parts and accessories below).
Power Supply: 1/N/PE 230 V AC.
Power Rating: 450 W.
Chiller type: Fan cooled condenser with compressor.
Storage capacity: 1.8 Litres.
Refrigerant type: Non-toxic R134A.
Heavy duty ChillTap
®
, chrome plated brass, self return lever action, vented with
swivel head.
Filtration type: Submicron filtration.
Chiller unit dimensions: Height: 385mm, Width: 355mm, Depth: 290.
Weight: Full 24Kg, Empty 22.2Kg
Technical data
Spare parts and accessories
Spare parts
Part No. Description
SP99249
Heavy duty ChillTap
®
ZT502
Sub micron filter
Optional accessories
Part No. Description
HE45004** Water block (water shut down system)
ZI001
Bubbler, non-vented system kit
AQ3
Pressure reducer set at 0.35 MPa (3.5
bar)
This appliance must not be used by any person (including children) with limited
physical, sensorial or mental abilities or failing experience and / or knowledge
unless they are supervised by a person responsible for their safety, or received
instructions about how to use the appliance.
Children should be supervised in order to make sure that they do not play with
the appliance.
The appliance must only be used when correctly functioning and installed.
This product is approved to the LVD and EMC directives and is CE marked.
This product has been examined, tested and found, when correctly
fitted, to comply with the requirements of the United Kingdom Water
Regulations / Byelaws (Scotland).
The products are listed under the WRAS (Water Regulations Advisory Scheme)
Water Fittings and Materials Directory.
Zip Heaters (UK) Ltd cannot be held liable for any damages caused by failure
to observe these instructions.
Leave these instructions with the end user after installation.
