803828 - Zip Filter Tap - Installation & Operating Instructions - Nov 2015 v1.02
Page 7 of 8
Read These Warning First
SAFETY INFORMATION
Read, understand, and follow all safety information contained in these instructions prior to installation and use of the High
Flow Series Water Filtration System. Retain these instructions for future reference.
Intended use:
The High Flow Series Water Filtration System is intended for use in filtering potable water in commercial applications and
has not been evaluated for other uses. The system is typically installed at the point of use and must be installed as specified
in the installation instructions by a qualified professional.
EXPLANATION OF SIGNAL WORD CONSEQUENCES
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or
property damage.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or
property damage.
WARNING:
To reduce the risk associated with choking:
•
Do not allow children under 3 years of age to have access to small parts during the installation of this product.
To reduce the risk associated with the ingestion of contaminants:
•
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA
Establishment #070595-CT-001
To reduce the risk associated with hazardous voltage due to an installer drilling through exist-
ing electric wiring or water pipes in the area of installation:
•
Do not install near electric wiring or piping which may be in the path of a drilling tool when selecting the position to mount
the system bracket.
To reduce the risk of physical injury:
•
Depressurize system as shown in manual prior to cartridge removal.
To reduce the risk associated with hazardous voltage:
•
If the home electrical system requires use of the cold water system as an electrical safety ground, a jumper must be used
to ensure a sufficient ground connection across the system installation piping — refer installation to qualified personnel.
CAUTION:
To reduce the risk associated with property damage due to water leakage:
•
Read and follow Use Instructions before installation and use of this system.
•
Installation and use MUST comply with all state and local plumbing codes.
•
Protect from freezing, remove filter cartridge when temperatures are expected to drop below 4.4° C (40° F).
•
Do not install systems in areas where ambient
temperatures may go above 43.3° C (110° F).
•
Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure exceeds 80 psi (552 kPa), you must
install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.
