6
B.
ZWD-2500R: HD Wireless Video
Receiver
Front Panel Buttons and LEDs
X
Power Button with LED indicator
Press to turn the receiver on and off. The
indicator in the Power button lights up in blue
when the power is on, and turns red in standby
mode. The signal strength indicator next to the
Power button shows the receiving signal quality
from transmitter.
Y
Source Selection Button
Press this button repeatedly until you see the
desired transmitting video on your TV set from
your High-Definition device.
Main unit backside
X
IR Sensor Extender Jack
Plug the IR Sensor Extender cable into the
IR IN
jack at the rear panel of the receiver.
Generally,
sensors with cable are placed near your HDTV
set so that you can easily receive and relay the IR
command for external device connected with
ZWD-2500T.
Y
HDMI OUT
Connect a HDMI cable. The other end connects
to the HDTV set.
Z
DC IN
For connecting the ZWD-2500R power adapter.