3
z
Ventilation:
Do not block the ventilation
slots on the receiver/transmitter or place
any heavy object on top of it.
Blocking the air flow could damage the
receiver. Arrange components so that air
can flow freely around the receiver.
Ensure that there is adequate ventilation if
the receiver is placed in a stand.
Put the receiver/transmitter in a property
ventilated area, away from direct sunlight
or any source of heat.
z
Water Exposure:
To reduce the risk of
fire or electric shock, do not expose the
receiver/transmitter to rain or moisture.
Special Notice
z
Never use this product nearby an aircraft
or medical facility. It will cause an
interference and wrong effect on the
operation.
z
Never use this product in the following
location where wireless wave will cause
the abnormal video and audio (noise,
blocked image...etc,).
¾
Installed in the walls that its used
material is hard accessible.
¾
This device should be situated away
from the refrigerator or metal
fitment.
¾
Crowded place
z
This product has been tested and
manufactured to comply with each
country’s safety rules. However, there is
no guarantee that interference will not
occur in a few particular installation. If the
interference is happened, increase the
separation distance between the
transmitter and receiver.
z
ZWD-2500 is susceptible to interference
from 5GHz wireless device, such as router
or other wireless device. For example, if
you have an 802.11n router, configure it to
use the 2.4 GHz band rather than the
5GHz band.
z
Optimal Range between ZWD-2500
transmitter and receiver is between 1
meter and 30 meters within line of sight.
TRADEMARK INFORMATION
z
HDMI, the HDMI Logo and
High-Definition Multimedia Interface
are trademarks of HDMI Licensing
LLC.
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
EMI (Electro Magnetic Interference)
tested.
CE DECLARATION OF
CONFORMITY
Zinwell Corporation declare under our
responsibility that the product is in
conformity with the following standards:
EN55013 (Radio disturbance characteristics
of broadcast receivers and associated
equipment)
EN55020 (Immunity from radio interference
of broadcast receivers)