5
2.2 Overview
A.
ZWD-2500T: HD Wireless Video
Transmitter
Front Panel Buttons and LEDs
X
Power Button with LED indicator
Press to turn the transmitter on and off. The
indicator in the Power button is lit solid blue
when the power is on, and turns red in standby
mode.
Y
Source Selection Button
Press to switch between the various inputs of
the transmitter. The one of four LED indicators
next to this button is lit solid blue to show
current input you switch. Press this button to
cycle through connected sources in sequence.
Note:
(1)
Make sure you have connected the
ZWD-2500R correctly to your HDTV set
by HDMI cable, and have selected the
correct
HDMI
input on your TV.
(2)
You can also press the
TRANSMITTER
POWER
button to turn the box on.
Main unit backside
X
IR Blaster Extender Jack
Plug the IR Blaster Extender Cable into the
IR
OUT
jack at rear panel of the transmitter.
Attach the IR blaster to the device connected to
the ZWD-2500T. You can point the device’s
existing remote at the ZWD-2500R receiver to
control connected device.
Y
HDMI IN
Connect Transmitter to High-definition video
devices that have an HDMI port using a provided
HDMI cable.
Z
Component Video IN/ Audio L/R IN
Connect to devices with Component jack
(YPbPr) and Audio L/R, such as DVD player,
Blu-Ray Player or Cable Set-Top Box.
[
DC IN
For connecting the ZWD-2500T power adapter.
Note: The ZWD-2500T transmitter can support
two devices running on HDMI cable and another
two running on YPbPr component video signals
at the same time. Only one AV source from
ZWD-2500T can be selected and displayed in
the HDTV set once Transmitter is paired
successfully with receiver.