9
4. Plug the other end of the RJ-45 network cable to “P+ DATA OUT” port of
PoE device. The PoE device is guaranteed only in indoor environment.
Caution: DON’T plug the power cord into PoE device before you finish install
the antenna and Ground wire to ensure the safety.
Make sure the maximum length of the RJ-45 cable is shorter than 100M (about
109 yards) for normal operation under IEEE 802.3 standards.
When you plug the regular RJ-45 cable into the PoE device, you should use
the regular RJ-45 cable to plug into the “DATA IN” of “Power Over Ethernet Kit”
to connect to hub/switch or use the crosslink RJ-45 cable (Not included in the
Packing List) to connect with user’s PC.
The RJ-45 network cable must be connected to the “P+DATA OUT” port.
Caution: Be careful! Don’t plug the two cables inversely. It will damage the
devices! And you have to use our PoE (included in the packing list) to
guarantee that power supply is normal.
