Zinc BMX-Vital, Инструкция по эксплуатации

Страница: 8 / 22

8
Customer Helpline 01582 670100
Assembly
H
Step 3
Loosen
Tighten
C
H
C
3c 3d
Loosen
Tighten
C
A
3a 3b
Minimum
Insertion
Mark
Loosen
Tighten
G
3c Adjusting the Position of the Saddle
The angle of the saddle
C
should be adjusted so that it is horizontal to the floor. To adjust the tilt of
the saddle, loosen the saddle clamp nuts
G
a quarter of a turn at a time using the multi tool supplied
until the saddle can be moved.
If required, the saddle
C
can be moved forwards or backwards on the seat post while the saddle
clamp nuts
G
are loose.
Once the saddle
C
is positioned correctly, retighten the saddle clamp nuts (G).
3d Adjusting the Height of the Saddle
The height of the saddle
C
should be adjusted so that the Rider can comfortably touch the ground
with both feet. To adjust the height of the saddle
C
, loosen the seat post clamp
H
until the seat post
can move freely
H
.
WARNING! When assembling the seat post, make sure it is inserted beyond the minimum insert
mark. Failure to observe this warning may lead to a potentially unstable seat post and may result in
serous personal injury.
3a Insert the Seat Post and Saddle
WARNING! When assembling the seat post, make sure it is inserted beyond the minimum insert
mark. Failure to observe this warning may lead to a potentially unstable seat post and may result in
serous personal injury.
Insert the lower end of the seat post and saddle
C
into the seat tube of the bike .
3b Securing the Seat Post
Tighten the clamp with the hexagonal key provided. Ensure saddle is tightly in position.
A
H