15
Customer Helpline
01582 670100
7b Attaching the Gyro
NOTE!
There are two different length of rear brake cable for attaching the gyro. The shorter cable
for left hand side of gyro (When sitting on the bike).
1
Locate the two rear brake cable ends (with metal beads). Insert the beads through the holes
on either side of the base of the stem. There is a barrel adjuster bolt at the end of each cable’s
housing. Thread this into the threaded hole that the cable was inserted into.
2
Once the barrel adjuster bolts are secure, lift the top connector plate and hook the cable ends into
the slot. There are two slots: one for each cable end.
3
Once set up the gyro mechanism should look like the example. Remember to test the brakes
before riding.
Step 7 (continued)
Assembly
NOTE
