Application information
3
Page 4
Treatment with
Z
Lipo
Med
Inspect the device before use. If there is any damage, it must not be used. Make
sure that the inner and outer surfaces of the handpieces are clean, paying particular
attention to the Peltier elements and the vacuum opening.
Clean and disinfect the handpieces before each treatment session.
The user can adapt the program settings to the patient’s fat and skin condition. Auto
mode is preset with proven parameters. However, the user can adjust the settings to
the patient’s condition.
Treatment results may vary.
The cooling fleece and the liner are essential and must be used at every treatment.
Always use a cooling fleece and a liner supplied by Zimmer MedizinSysteme GmbH,
not only to improve efficacy but also to protect the treated area.
Do not alter the temperature during treatment.
The fleece and the liner are disposable items and should not be reused since
this may lead to adverse effects.
If the handpiece heats up significantly during treatment and / or the LEDs on the
handpiece do not light up and / or the start / stop button on the handpiece does not
respond, the treatment must be interrupted. Please contact the manufacturer.