Zimmer Soleo Galva, Руководство по эксплуатации

Страница: 30 / 144

20
Soleo SonoStim
Quick operating instructions
4.1 Electrotherapy
4
Starting therapy
The display in the lower status bar changes from ‘Ready’ to ‘Active’ and the
therapy is started by adjusting the intensity using the intensity controller on the
left. The effective current is shown in the bar graph and the therapy time
counts down in seconds.
Ending therapy
At the end of the therapy time, an acoustic signal indicates that the therapy has
ended, the clock is reset to 00:00, the intensity automatically returns to zero
and the bar graph display disappears. The display in the bottom status bar
changes from ‘Active’ to ‘Ready’.
The therapy time is automatically reset at the end of the therapy.
Note: The Vacuum icon is only visible if VacoS is connected to Soleo SonoStim /
Soleo Galva and switched on as described in Chapter 2.2.