Zimmer Persona Trabecular Metal Femoral Component Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 24

Zimmer Persona Trabecular Metal Femoral Component Скачать руководство пользователя страница 2

INTRO

INTRO.

1

Introduction

The Persona

®

Trabecular Metal

™

Femoral Component is

designed to unite stable porous femoral component fixation
with compatible cruciate-retaining, ultracongruent, and posterior
stabilized articular surface implants. This Surgical Technique
covers all femoral preparation, finishing, and implantation
steps for the Trabecular Metal Femoral Component; please
reference the appropriate Persona Knee Surgical Technique for
all additional surgical steps including surgical approach, tibia/
patella preparation and implantation, balancing, constraint
options, and compatibility.
Successful porous femoral component arthroplasty is
dependent three key components:

1. Bone Resection Accuracy

Precise, flat bone cuts are essential to maximize
Trabecular Metal material contact with the resected bone
and ensure appropriate press-fit to promote stable,
long-term fixation.

2. Patient Bone Quality

The Persona Trabecular Metal Femoral component should
only be used on patients with good bone quality to ensure
in-growth will occur. Stable fixation may be compromised
if used on soft, osteoporotic bone quality.

3. Ambulation Period

An uncemented total knee replacement requires a
period of time to achieve stable bone growth into the
Trabecular Metal material for successful, long-term
fixation. As such, patient rehabilitation should be
tailored for porous knee components.

To achieve the three key components vital for successful
porous femoral component arthroplasty, some additional
TM-specific technique tips are as follows.

•

Saw Blades

Use new saw blades and consider changing the saw

blade during the surgery if it becomes dull or ineffective.

•

Distal Thickness

The Trabecular Metal Femoral Component is

approximately 0.5mm thicker distally than the
cemented component. Surgeons may elect to account
for this thickness during the distal femoral resection or
the proximal tibial resection.

Trabecular Metal

™

Femoral Component

Surgical Technique

«
1
2
3
4
...
»

Содержание Persona Trabecular Metal Femoral Component

























Отзывы:

Нет отзывов