Zimmer GPP5025N-00-A, Инструкция по установке и эксплуатации

Страница: 16 / 18

16
11 Maintenance
WARNING
Risk of injury from crushing
Removing the cover of the wedge hook transmission results in a crushing hazard between the gripper jaws.
Crushing injuries can result from the gripping process.
►
Make sure that there are no parts of the body in the range of movement of the product!
► Only permit installation, maintenance and servicing work to be carried out by trained personnel.
►
Do installation, maintenance and servicing work in jog mode only.
WARNING
Risk of injury due to objects being ejected
The product has integrated gripping force retention. This device is a spring that acts as an energy accumulator.
When uninstalling the piston cover, it and/or the piston can be ejected due to the pretensioned spring.
► When disassembling the product, use a device that prevents the piston or the piston cover from being ejected.
► Have maintenance work be performed only by Zimmer Customer Service.
CAUTION
Risk of injury from impact
When the gripper jaws are opening, there is a risk of impact in the guide area.
CAUTION
Material damage resulting from blowing out with compressed air
Blowing out the product with compressed air can cause malfunctions and pose a risk of accidents.
► Never purge the product with compressed air.
CAUTION
Material damage caused by liquid and solvent-based cleaners
Liquid and solvent-based cleaning agents can cause malfunctions and pose a risk of accidents.
►
Do not clean the product with any cleaning agents that are liquid or contain solvents.
NOTICE
Material damage due to leaking lubricant
Excessive lubrication can cause moving machine parts to leak lubricant. This can contaminate the machine,
object being gripped or workpiece.
►
Only use approved or recommended lubricants.
►
Observe the manufacturer information for use of specific lubricants.
►
Adhere to the lubrication interval.
►
Avoid excessive lubrication.
►
Remove leaking lubricant immediately and thoroughly.
► Replace damaged seals.
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS: GPP5000, GPD5000
DDOC00196 / m
EN / 2023-06-05