9
10.3 Installing the sensors
10.3.1
Adjusting the magnetic field sensors
NOTICE
►
Note that switching point shifts may occur if the sensors are exposed to an additional, external magnetic field.
INFORMATION
The sensors are available as accessories.
►
More information can be found in the installation and operating instructions of the sensor.
10.3.2 Setting the inductive sensors
INFORMATION
External limit stops are a requirement to use inductive sensors.
►
For information on optional accessories and those included in the scope of delivery, refer to our website.
►
Switch off the power supply.
1
2
3
►
Slide the sensor into the terminal block.
►
Position the sensor at an appropriate switching distance from the
switch cam.
►
Clamp the sensor.
1
Switch cam
2
Inductive sensor
3
Terminal block
10.4 Installing accessories
NOTICE
►
Before installing an accessory, make sure it is suitable for use with the selected variant.
►
You can find information on our website.
►
Please contact Zimmer Customer Service if you have any questions.
INSTALLATION AND OPERATION INSTRUCTIONS:
GH6000
DDOC00274 / e
EN / 2023-02-13
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
Содержание GH6000
Страница 2: ......
