Zimmer GEP2000IO-45 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 55

background image

7

3 Proper use

NOTICE

The product is only to be used in its original state with its original accessories, with no unauthorized changes and

within the stipulated parameter limits and operating conditions.
Any other or secondary use is deemed improper.

►

Operate the product only in compliance with the associated installation and operating instructions.

►

Operate the product only when it is in a technical condition that corresponds to the guaranteed parameters

and operating conditions.

Ö

Zimmer GmbH shall accept no liability for any damage caused by improper use. The operator bears sole

responsibility.

The product is designed exclusively for electric operation using a 24 V DC power supply.
The product must always be mounted on materials that dissipate heat.

The product is intended for industrial use.

The product is to be used as intended in enclosed rooms for temporary gripping, handling and holding.
The product is not suitable for clamping workpieces during a machining process.
Direct contact with perishable goods/food is not permitted.

Observance of the technical data and of the installation and operating instructions are part of proper use.

4

Personnel qualification

Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read

and understood the installation and operating instructions in full.

INSTALLATION AND OPERATING INSTRUCTIONS:

GEP2000

DDOC01113 / c

EN / 2022-11-16

Zimmer GmbH • Im Salmenkopf 5 •



77866 Rheinau, Germany •



+49 7844 9138 0 • www.zimmer-group.com

«
...
5
6
7
8
9
...
»

Содержание GEP2000IO-45
























































Отзывы:

Нет отзывов

Похожие инструкции для GEP2000IO-45

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 13

Бренд: T&D Страницы: 28

Бренд: Vahle Страницы: 36

Бренд: Vahle Страницы: 20

Бренд: Vacon Страницы: 102

Бренд: Varimixer Страницы: 28

Бренд: Meritor Страницы: 65

Бренд: Flex-A-Seal Страницы: 7

Бренд: Topcon Страницы: 38

Бренд: AMVAC Страницы: 81

Бренд: Topcon Страницы: 76

Бренд: Barkey Страницы: 72

Бренд: Samson Страницы: 20

Бренд: Scanlab Страницы: 39

Бренд: P.Lindberg Страницы: 10

Бренд: Klus Страницы: 8

Бренд: Campbell Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды