INSTALLATION AND OPERATING INSTRUCTIONS:
GEH6000IL/GED6000IL
INSTALLATION AND OPERATING INSTRUCTIONS:
GEH6000IL/GED6000IL
62
63
EN / 2021-07-28
DDOC00212 / 0
EN / 2021-07-22
DDOC00212 / 0
Zimmer GmbH
•
Am Glockenloch 2
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
www.zimmer-group.com
Zimmer GmbH
•
Am Glockenloch 2
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
www.zimmer-group.com
Declaration of Incorporation
In terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B)
Name and address of the manufacturer:
Zimmer GmbH
Im Salmenkopf 5, 77866 Rheinau, Germany
+49 7844 9138 0
www.zimmer-group.com
We hereby declare that the incomplete machines described below
Product designation:
2-jaw parallel gripper/3-jaw concentric gripper, electric
Type designation:
GEH6000IL/GED6000IL series
conform to the requirements of the Machinery Directive, 2006/42/EC, Article 2g, Annex VIIB – Annex IIB, in their design and
the version we put on the market.
Basic health and safety requirements:
No. 1.1.2., No. 1.1.3., No. 1.1.5., No. 1.3.2., No. 1.3.4., No. 1.3.7., No. 1.5.3., No. 1.5.4., No. 1.5.8., No. 1.6.4., No. 1.7.1., No.
1.7.4.
The following harmonized standards have been used:
DIN EN ISO 12100:2011-03
Safety of machinery – General principles for design – Risk assessment and risk reduction
DIN EN 60204-1
Safety of machinery – Electrical equipment of machines, part 1
DIN EN ISO 13849-1
Safety of machinery – Safety-related parts of control systems
DIN EN ISO 13849-2
Safety-related parts of control systems
A full list of applied standards can be obtained from the manufacturer.
We also declare that the specific technical documents were produced in accordance with Annex VII Part B of this Directive.
We undertake to provide the market supervisory bodies with electronic versions of special documents for the incomplete
machine through our documentation department, should they have reason to request them.
The incomplete machine may only be commissioned if it has been ascertained, if applicable, that the machine or
system in which the incomplete machine is to be installed satisfies the requirements of Directive 2006/42/EC on
Machinery and an EC Declaration of Conformity has been drawn up in accordance with Annex II 1 A.
Kurt Ross
Rheinau, Germany, 2021-06-04
Authorized representative for
compiling the relevant technical
documents
(Place and date of issuance)
Martin Zimmer
(Legally binding signature)
Managing Partner
Declaration of Conformity
In terms of the EC Directive 2014/30/EC on electromagnetic compatibility
Name and address of the manufacturer:
Zimmer GmbH
Im Salmenkopf 5, 77866 Rheinau, Germany
+49 7844 9138 0
www.zimmer-group.com
We hereby declare that the products described below
Product designation:
2-jaw parallel gripper/3-jaw concentric gripper, electric
Type designation:
GEH6000IL/GED6000IL series
conform to the requirements of the Electromagnetic Compatibility Directive 2014/30/EU in their design and the version we
put on the market.
The following harmonized standards have been used:
DIN EN ISO 12100:2011-03
Safety of machinery – General principles for design – Risk assessment and risk reduction
DIN EN 61000-6-3
EMC Generic standard, Emission standard for residential, commercial and light-industrial
environments
DIN EN 61000-6-2
EMC generic standard, Immunity for industrial environments
DIN EN 61000-6-4
EMC Generic standards, Emission standard for industrial environments
A full list of applied standards can be obtained from the manufacturer.
Kurt Ross
Rheinau, Germany, 2021-06-04
Authorized representative for
compiling the relevant technical
documents
(Place and date of issuance)
Martin Zimmer
(Legally binding signature)
Managing Partner
