9
/
59
After this, the camera will connect the internet via your wireless router.
Note: I f you have any question during the setup, please connect our technical support.
Add Camera
1.1
LAN Search
Click
to add camera, change to add camera interface, type in camera name,click
Search Camera from LAN button, search the network camera in the mobile phone wireless
network; Select the UID;
Enter the camera password (default is admin)
Click the done button on the upper right corner.
1.2
Scan QR Code
If the camera has a QR code sticker which use this UID, click Scan QR Code button to
scan the bar code to add camera.
Delete Camera
Hold the camera
, it will prompt “Are you sure you want to remove this camera”, click
“Ok” to delete the camera
View the video
After add the camera for a few seconds, waiting the camera connected successfully,
when prompt online instructions, it means you can view the camera video now:
Camera status illustration:
Connecting: Now the camera is connecting with network, according to different network,
it costs different time;
Online: It means the device connected normally, click to view the video.
Congratulations!
Now you have successfullycompleted the installation of the camera on your smartphone/tablet.
You can take time to view the camera immediately. For other advanced software settings, such
as motion detection Alarm Settings, Email Settings, Video Settings, please refere to the user
manual in the CD-ROM in details.
3.Personal Computer Installation Method
If you want to install the camera by a computer for the first time, please follow the below
instructions after you have finished the hardware installation.
