Zigo Leader, Руководство по сборке и эксплуатации

Страница: 53 / 150

51
ENGLISH
9.6 Seasonal Maintenance
The ChildPod® and Cycle frames should be cleaned and protected regularly.
Have the Cycle tuned and adjusted as outlined in your Bicycle Manual.
• Tighten locking nuts in the LeaderLink® steering Tie Rod and Drag Link.
• Check brake pads in ChildPod® hub for excessive wear.
• Check LeaderLink® Connection to ensure brake is connecting
• Refer to Bicycle Manual for Cycle maintenance.
9.7 LeaderLink®
Ensure that both the LeaderLink® Brake Coupler and Pod Clamp connection
points thread in properly and smoothly. These knobs do not need to be forced.
Verify that the Cycle Fork Dropouts fi t onto the Steering Interface properly.
Damage to either the Dropouts or Steering Interface may result in a failure in
LeaderLink® Steering.
If the Brake Coupler, Pod Clamp, Fork Dropouts, or Steering Interface become
damaged and do not thread/fi t properly, discontinue use of your Zigo® Leader™
immediately and contact your nearest Authorized Zigo® Dealer for servicing or
contact Zigo® directly.
9.7.1 LeaderLink® Braking
As is the case with any cable brake system, the LeaderLink® Braking System
may require adjustment from time to time. Please review this section carefully.
LeaderLink® Balance Response Braking is also connected to the ChildPod®’s
Jogging Brake and, to a lesser degree, the Cycle Front Wheel brake.
Adjust Brake Lever Barrel Adjustor:
!
WARNING!
If you notice that the LeaderLink® Balance Response Braking requires
adjustment, do so in the following sequence. Failure to do so may
result in failure in the LeaderLink® Balance Response Braking.
1. Convert your Leader™ into Carrier Bicycle Mode and connect the LeaderLink®
Brake Coupler.