22
RXAV Commands
Please look in RXAV manual further details
Command structure for ZIG-POEW-RXAV
<@hostname><space><command><space><parameter><end of command>
<@hostname> indicates the specific target RXAV device
<space> indicates a space or HEX 0x20
<command> defines the current operation
<parameter> is the variable or the value passed to the device
<end of command> newline char ‘\n’
Command
Syntax
Description
Help
@rxav-xxxx help
Shows a list of available commands
Uptime
@rxav-xxxx uptime
Shows elapsed time.
Version
@rxav-xxxx version
Provides firmware info release number,
revision number, build date and serial
number.
Discovery
@rxav-xxxx disco
Provides a list of other Zigen products
on the network
Set Volume
@rxav-xxxx vol <-136 - 10>
Sets a fixed volume in dB on the
RXAV
Increase
Volume
@rxav-xxxx volup
Increase volume in 1dB steps
Decrease
Volume
@rxav-xxxx voldn
Decrease volume in 1dB steps
Bass Level
@rxav-xxxx base
<-10
– 10>
Set device bass level in 2dB steps
Treble Level
@rxav-xxx treb <-10
– 10>
Set device treble level in 2dB steps
Mute
@rxab-xxxx mute
<on/off/toggle>
Enable/Disable mute on the rxav
Relay 1
@rxav-xxxx rel1
<on/off/toggle>
Enable/Disable relay 1 on the rxav
Relay 2
@rxav-xxxx rel2
<on/off/toggle>
Enable/Disable relay 2 on the rxav
Status
@rxav-xxxx st
Get device status such as power,
volume, bass, treble, mute, relay1,
relay2
Device Info
@rxav-xxxx man
Get device information
Power
@rxav-xxxx pwr <on/off>
Enable/Disable AV stream
Sy
st
em
C
ont
rol