TR1200
12320-0702-03
Seite
11 / 20
www.ziehl.de
8.10 Simulation
A sensor can be selected and a temperature simulated here. All device functions operate as if this value is
actually being measured. Error messages are only indicated by LED and not in the display.
The set values are simulated until the menu item
8
si .
8
is left with the Up or Down button.
If no key has been pressed for 15 minutes, the device automatically switches back to the display mode.
Adjustment process:
Select the menu item with the Up/Down key until …
Display
8
si .
8
(Simulation)
Press the Set key
Display
8
si
8
/
8
S 1
8
(Simulation / Sensor) flash alternately
Use the Up and Down keys to select the sensor function
Press the Set key
Display
8
0
8
(Temperature)
Simulate the desired temperature using the Up and Down keys
Press the Set key
Display
8
si .
8
(Simulation)
By pressing the Set button repeatedly all sensors can be selected in succession. The simulated
values are retained until the menu item
8
si .
8
is left by pressing Up or Down.
8.11 Code lock
Here, the set parameters can be protected by activating a code lock. The device acknowledges an incorrect
entry with
8
err
8
(flashes three times).
Adjustment process:
Select the
menu item with the Up/Down key until …
Display
8
Cod.
8
(Code lock)
Press the Set key
Display
8
Pin
8
/
8
0
8
(Pin / Pin code) flash alternately
Use the Up and Down keys to set the
saved
pin code (
factory setting is
8
504
8
)
Press the Set key
Set the desired code block using the Up and Down keys:
o
8
off.
8
off, all parameters can be changed
o
8
On
8
on, no parameters can be changed
Press the Set key
Display
8
Pin
8
/
8
504
8
(Pin / Pin code) flash alternately
Set the desired new pin code with the Up and Down keys
(caution: write down the pin code)
Press the Set key (exits code locking)
Code lock on, display
8
on
8
flashes three times
Code lock off, display
8
off
8
flashes three times
Display
8
Cod.
8
(Code lock)
