ZIEHL MS220VA, Руководство по эксплуатации

Страница: 8 / 12

MS220VA and MSR220VA 11660-0701-03-GB Page 8 / 12 www.ziehl.de
48
58
4
5
3
6
1
,8
16,5
(9
0
)
Option
9
8
1
1
6
35
3
4
1
2
5
7
6
Housing Design V2
Dimensions (H x W x D) mm 90 x 35 x 58
Plastic Material PA66
Fire protection class UL 94 V-2
Protection class housing EN 60529 IP 30
Mounting EN 60715 standard rail 35 mm
Optional: Screw mounting M4, only with additional bolt (not part of delivery)
Protection class terminals EN 60529 IP 20
Tightening torque 0.5 Nm
Line connection solid wire 1 x 0.5...2.5 mm
2
(AWG 22
– 14)
Stranded wire with insulated ferrules 1 x 0.14 mm
2
…1.5 mm
2
Insulation strip length min. 8 mm
Weight approx. 117 g
Subject to technical modifications
14
Dimensions - Design V2
Dimensions in mm
1 Top
2 Bottom
3 Bolt
4 Seal mounting link
5 Front plate element
6 Characteristic for bottom
7 Extensible bolt for wall fastening with screws. Bolt bore Ø 4.2 mm.
15
Safety Instructions and references for putting into operation
– please read carefully!
15.1 Special remarks for explosive gas atmospheres areas (Zone 0, Zone 1 and Zone 2)
•
The increased danger within hazardous areas requires the careful attention of the safety instructions
and references for putting into operation. Observe the national safety rules and regulations for
prevention of accidents as well as the European Standard EN 60079-14. All work for the connection,
for putting into operation and maintenance is to be implemented by qualified, responsible technical
personnel. Inappropriate behaviour can cause heavy personal damage and damages to property.
•
The response of the thermal motor protection must directly switch off the motor, also when used
together with converters. This must be realized in the logic section or configuration in the converter.