TR210
12430-0701-02
Page
6 / 24
www.ziehl.de
8
Installation
The unit can be installed as follows:
•
mount on 35 mm mounting rail according to EN 60715
•
wall-mount with 3 x screws M4
•
connecting wires refer to the connection plan to prevent miss-operation and malfunction.
9
Putting into operation
Decimal point behind the last digit:
Off
= display mode, displays values of measuring inputs
On
= menu mode, select the menu items
blinking
= parameter setting mode
9.1 Display mode
Indication of the current sensor temperature. The temperature is shown in degrees centigrade. The
indication for voltage (0-10 V) and current (0/4-20 mA) can be scaled.
LED relay (K1, K2)
ON
= relay picked up
LED sensor
ON
= appropriate value in the display
flashes = sensor error
Function of buttons UP/DOWN
Push short
change into menu mode
Push for > 2 s
Display of the stored MIN- or MAX-
values of the chosen sensor
Function button SET/RESET
Push short
two sensors
Display sensor 1 / sensor 2 (/ difference)
one sensor
Display sensor / alarm limit 1 / alarm limit 2
Push for 2 s
Reset restart interlock
Push for 4 s
Display of chosen program
Push for 10 s
Display of software version
9.2 Menu mode
(Decimal point behind the last
digit
ON)
Selection of the menu items for changing the parameters. In the menu items for sensor- and alarm parameterizing the LEDs indicate the
special classification sensor-alarm-day/night - difference.
Function button UP/DOWN
Push short
Selection of menu item; Change into display mode
Function button SET/RESET
Push short
Change into parameter setting mode
9.3 Parameter setting mode (Decimal point behind the last
digit
FLASHES)
LEDs indicate sensors and relays concerned by the selected parameter setting point as well as
day/night-switching and differentiation measurement.
Function button UP/DOWN
Press short/long
Adjustment of parameter value
(slow/fast)
Function button SET/RESET
Press short
Storage of setting and choice of next parameter.
Change into menu mode after the last parameter