ZIEHL MINIPAN 300, Руководство по эксплуатации

Страница: 5 / 12

date / name ) : 06.09.07 WL / Fz/Fu Z. Nr.: 12110-0710-01
Page 5 of 12 Type: Minipan 300
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
Putting into Operation
Connect supply-voltage Us.
Connect signal to measuring input.
Connect one input only!
Setting of Parameters:
Decimal point behind last digit:
off = display mode (measured values)
on = menu mode, select the menu items
blinking = parameter setting mode
Display Mode
Display of actual measured value.
Function buttons Up/Down
Push short Change to menu mode, selection of menu item
Push for > 2 s Display of stored MIN- or MAX- values
Function of button Set /Reset
Push short no function
Push for > 2 s Reset of MIN- or MAX-value (with Min- or Max-button pushed
simultaneously)
Push for > 10 s Display of software-version
Menu Mode (Decimal point behind last digit ON)
Selection of the menu items for changing the parameters.
Function buttons Up/Down
Push short Selection of menu item; Change into display mode
Function Taste Set/Reset
Push short Change into parameter setting mode
Parameter setting mode (Decimal point behind the last digit FLASHES )
Function buttons Up/Down
Push short/long Adjustment of parameter value (slow/fast)
Function button Set/Reset
Push short
Storage of setting and choice of next parameter.
Change into menu mode after the last parameter
Parametrizing of Input / Measuring Range
Select menu item with Up/Down until display InPU and measuring range alternate.
Change into parametrizing mode with Set and select measuring range with Up/Down.
Confirm and change to next menu with Set.
When changing measuring range parameters for scaling the display are set to:
InLo = 0%, InHi = 100 % of measuring range, diLi = 0 , diHi = 5000 und dp = 0000.
Scaling the Display
Select menu item with Up/Down until display
ScAL
and mode (
Auto
or
USEr
) alternate.
Change into parametrizing mode with Set and select mode with Up/Down.
Auto
: Display = measured signal without scaling.
USEr
: Range of input-signal and range of display can be set by the user. The range of the
input-signal must be within the measuring range.