FR(MU)1000
12460-0751-02
Seite
3 / 8
www.ziehl.de
4
Important Information
DANGER!
Hazardous voltage!
Will cause death or serious injury. Turn off and lock out all power
supplying this device before working on this device.
To use the equipment flawless and safe, transport and store properly, install and start professionally and
operate as directed.
Only let persons work with the equipment who are familiar with installation, start and use and who have
appropriate qualification corresponding to their function. They must observe the contents of the instructions
manual, the information which are written on the equipment and the relevant security instructions for the
setting up and the use of electrical units.
The equipments are built according to DIN / EN and checked and leave the plant according to security in
perfect condition. If, in any case the information in the instructions manual is not sufficient, please contact
our company or the responsible representative.
Instead of the industrial norms and regulations written in this instructions manual valid for Europe, you
must observe out of their geographical scope the valid and relevant regulations of the corresponding
country.
Observe the maximum temperature permissible when installing in switching cabinet. Make
sure sufficient space to other equipment or heat sources. If the cooling becomes more
difficult e.g. through close proximity of apparatus with elevated surface temperature or
hindrance of the cooling air, the tolerable environmental temperature is diminishing.
Attention!
When all relays are programmed in operation current mode (= pick up at alarm), a loss of the
supply voltage or an instrument failure can remain unidentified. When the relay is applied as control
instrument, the operator must ensure, that this error is recognized by regular examinations. We
recommend to program and accordingly evaluate at least one relay in the closed-circuit current
mode.
Universal power supply
The device has got a universal power supply, that is suitable for DC- and AC-voltages. Before connecting
the device to supply-voltage make sure that the connected voltage corresponds with the voltage on the
lateral type on the device.
5
Installation
The unit can be installed as follows:
•
Installation in switchgear cabinet on 35 mm mounting rail according to EN 60715
•
With screws M4 for installation on walls or panel. (additional latch included in delivery)
Connection according to connection plan or type plate.
!
