1 General information
1.1
Structure of the assembly instructions
"
The assembly instruction does not replace the original operating instructions of the motor or
frequency inverter!
"
The original operating instructions has to be always available!
1.2
Target group
The assembly instructions address persons entrusted with planning, installation, commissioning and
maintenance and servicing and who have the corresponding quali
fi
cations and skills for their job.
1.3
Exclusion of liability
ZIEHL-ABEGG SE is not liable for damage due to misuse, incorrect use, improper use or as a
consequence of unauthorized repairs or modi
fi
cations.
1.4
Copyright
This assembly instructions contains information protected by copyright.ZIEHL-ABEGG SEThe assem-
bly instructions may be neither completely nor partially photocopied, reproduced, translated or put on
a data medium without prior explicit consent from. Infringements are liable for damages.
2 Safety instructions
2.1
General
ZIEHL-ABEGG SE spare parts are not ready-to-use products and may only be operated when they
have been installed on an elevator machine and their safety has been assured using guard grilles,
barriers, structural attachments or other appropriate measures, depending on the application (see
also DIN EN ISO 13857)!
2.2
Pictographs
Safety instructions are highlighted with warning triangles and are depicted according to the degree of
hazard as follows.
Danger!
General hazardous area. Death or severe injury or signi
fi
cant property damage can occur if the
corresponding precautions are not taken!
Information
Important additional information and advice for user.
2.3
Requirements placed on the personnel / due diligence
Danger!
"
Installation, connection to the power supply and commissioning may only be performed by quali
fi
ed
service personnel! The relevant regulations must be observed!
"
Persons entrusted with the planning, installation, commissioning and maintenance and servicing in
connection with the elevator machine must have the corresponding quali
fi
cations and skills for
these jobs. Based on their training, knowledge and experience as well as knowledge of the relevant
standards, they must be able to judge the work transferred to them and be able to recognize
possible hazards.
"
In addition, they must be knowledgeable about the safety regulations, EU directives, rules for the
prevention of accidents and the corresponding national as well as regional and in-house
regulations. Personnel undergoing training, instruction, or on apprenticeship may only work on the
elevator machine under the supervision of an experienced person. This also applies to personnel in
general training.
"
Comply with the legal minimum age.
Assembly instructions
–
model series ZAtop
General information
A-TIA21_08-GB 2021/21 Index 001
Part.-No. 01013509-GB
3/20
