Figure 8-05
Figure 8-06
8.
Caution:
Due to the great weight of the brake body, we recommend you to secure and change
the brake body by using an eye bolt M12 (10) and appropriate lifting gear.
9. Slide brake body 1 (16) over the threaded bolts up to the motor housing
ATTENTION! Weight of brake body approx. 50 kg!
10.
Design with hand release:
Slide brake body 1 (16) with the pre-assembled hand release components - tension
discs (16A)/hexagon head bolts (16B)/adjusting nuts (16C) - over the threaded bolts up to
the motor housing
ATTENTION! Weight of brake body approx. 50 kg!
Figure 8-07
Figure 8-08
11. Screw on brake body 1 (16) by hand with the socket cap screws M16 x 110 (15)
12. Uniformly fasten the 3 socket cap screws M16 x 110 (15) gradually in turn using a torque wrench
with size 14 socket head wrench.
Tightening torque: 200 Nm
13. Endue the socket cap screws with anti tamper paint (25).
14. Make sure that the friction lining of brake rotor 2 (14) is free of dirt and grease. Clean with a micro
active cloth (23) and LOCTITE
®
7063 (27) rapid cleaner from the
“
Brake assembly kit
”
(article
number 70029992/70029993).
15. Slide the brake rotor 2 (14) with the O-ring (18) onto the toothed hub (19) by hand by exerting
light pressure.
ATTENTION!
Make sure that the long rotor collar is facing towards the brake body 1.
16. Make sure that the gear teeth engage easily.
17. O-ring may not be damaged.
Assembly instructions
–
model series ZAtop
Mounting the brake
A-TIA21_08-GB 2021/21 Index 001
Part.-No. 01013509-GB
11/20
