ZIEHL-ABEGG FE2owlet-ECQ Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 24

ZIEHL-ABEGG FE2owlet-ECQ Скачать руководство пользователя страница 15

5 Commissioning

5.1 Prerequisites for commissioning

Attention!

•

During commissioning, unexpected and hazardous conditions can arise in the entire
installation due to defective adjustments, defective components or incorrect electrical
connections. Remove all persons and objects from the hazardous area.

•

Do not start the fan until all safety instructions (DIN EN 50110, IEC 364) have been
checked, the fan is out of range (DIN EN ISO 13857) and danger can be ruled out.

•

A-rated sound power levels of over 80 dB(A) are possible, see product catalogue.

Before

ﬁ

rst-time start-up, check the following:

1. Installation and electrical connection have been properly completed?
2. Has any leftover installation material and other foreign material been removed from

the fan area?

3. That safety devices -if necessary- are mounted (EN ISO 13857)?
4. The impeller is out of reach?
5. Are the drain holes (as far as available) open or respectively closed according to

the suitable installation position?

6. Connection data complies with the speci

ﬁ

cations on the rating plate?

During start-up check the following:

1. Check the rotat. direction (see the rotat. direction arrow on the fan blade, impeller

base plate or intake-side support plate).

2. Check for quiet, low vibration operation. Strong vibrations due to erratic operation

(unbalanced), e.g. caused by transportation damage or improper use, can lead to
failure.

3. Check the system for resonances. If they lead to unacceptably high vibrations on

the fan, the system must not be started up.

4. Fans from ZIEHL-ABEGG SE are delivered balanced in accordance with

DIN ISO 21940-11 for the appropriate fan category in accordance with ISO 14694.
Check the fan for mechanical vibrations after installation. If the limit values of the
corresponding fan category are exceeded in start-up, you must have the motor/im-
peller unit checked by an expert and rebalanced if necessary before continuous
operation is permitted.

Assembly instructions

FE2owlet-ECQ

Commissioning

L-BAL-F062-GB 2022/20 Index 004

Part.-No. 00702389-GB

15/24

«
...
13
14
15
16
17
...
»

Содержание FE2owlet-ECQ

























Отзывы:

Нет отзывов