Info
•
Every screwing case is di
ff
erent. The tightening torque adapted to it must be
determined by the appropriate screw tests.
•
Avoid structural damage or stress with installation. Make sure the surface is
fl
at and
even.
•
Secure fan connection cable with cable fasteners on guard grille or support struts.
L-KL-3395
Fans design E
A minimum head gap
“
A
”
of
3.5 mm in all installation positions,
but especially in installation
position H (horizontal motor shaft),
is necessary. Installation surfaces
must be level.
4.5 Connection of the motor
Danger due to electric current
•
The mains voltage must comply with the EN 50160 quality characteristics and the
de
fi
ned standard voltages in IEC 60038!
•
Connect the motor only to electrical circuits that can be disconnected with an all-pole
isolating switch.
•
The device owner is responsible for the EMC of the entire plant according to the
locally applicable standards.
Connection diagram for motors with one speed
KT00047B
18.11.2015
M
1 ~
ECQ
BU
rpm 1
BN
N
L1
N, L1
Line voltage see rating plate
BN
brown
BU
blue
Assembly instructions
FE2owlet-ECQ
Mounting
L-BAL-F062-GB 2022/20 Index 004
Part.-No. 00702389-GB
13/24