MAINTENANCE AND CARE
26
Fig. 14
Shares and tines
The device can be used with different tines. The
shares are reversible. The shares must be re-
placed when both sides are worn.
After wear on the first side of the share
Reverse the share once one of its sides has be-
come worn.
−
Loosen the nut of the screw.
−
Turn the share 180°.
−
Re-tighten the nut of the screw.
After both sides of the share are worn
The shares must be replaced when both sides are
worn.
−
Loosen the nut of the screw and remove the
screw.
−
Remove the share.
−
Fit a new share using a new screw and nut.
−
Tighten the nut.
Fig. 15
Trailing rollers
Check the trailing rollers and the bearings for their
stability and free concentric run.
Check the wear of the gear racks and replace the
roller if necessary.
