In the Box
Control Panel
LED Indicators
GSM Indicator
Blinks once per second: Searching network.
Blinks once per 3 seconds: Connected with network.
System Status Indicator
On: System is armed.
Keeps blinking: System is in home mode.
Off: System is disarmed.
Voice Memo Indicator
Lights up after pressing: Record voice memo.
Keeps blinking: There is a new voice memo.
Off: No new voice memo.
Key Operation
1.
SOS
:
System will alarm immediately when this button is pressed.
2.
Arm:
Press
[
@
]
to arm your system. Now all the sensors are guarding.
3.
Disarm:
Enter the password (default setting: 1234) and press
[
Q
]
to disarm your
system. Now your system stops handling alarm signal from sensors (except these
sensors in 24-H zone).
4.
Home Arm
:
Press
[
©
]
to part arm your system. Now your system only stops handling alarm
signal from home mode zone sensors.
5.
Call:
Enter a phone number and press this call button to dial.
6.
Record Voice Memo:
Press and hold it for 3 second to leave a 10-second voice
memo. Press once to listen to a new voice memo or replay.
Rear
Tamper switch
:
when it is pressed, the system will alarm immediately.
Yo u can turn on or turn off this function by sending SMS
“87201” or “87200“ to the SIM
card No. of the control panel.
RFID Tag Reader
Induce the RFID tag to this reader area to disarm the system and unlock the electronic lock (if
connected).
1
2
Adapter Jack
Power On/Off
Tamper Switch
Output for Electronic Lock
SIM Card Slot
