Setting through SMS
For example:
1. Send
“5” to the SIM card number of the control panel.
If you use a non-smart phone, you can set your system by sending the related SMS
command codes to the SIM card in the control panel.
Item
SMS Command Code
SMS menu
?, ??, ???
System setting inquiry
00
Disarm
0
Arm
1
Home mode
2
Two-way talk
3
Call back to leave a 10-second voice memo
4
Store emergency telephone numbers
5
Store emergency SMS numbers
6
Store SMS No. for RFID tags
7
Store speed dial numbers
8
Change zone name
901~950
Change RFID tags name
101~150
Set exit & entry delay time
11
Set alarm volume and ringing time
12
Change disarm password
13
Set single zone delay time
14
Delete wireless sensors
21
Delete all RFID tags
22
Delete all remote controls
23
Restore system to default setting
0000
Turn off the tamper switch of control panel
87200
Turn on the tamper switch of control panel
87201 (Default)
Turn off the arm/disarm tone of wireless siren
63700 (Default)
Turn on the arm/disarm tone of wireless siren
63701
2. You will receive a menu SMS from the control panel.
TEL:
1
.
2
.
3
.
4
.
5
.
3. Copy and edit the menu message, and then send it back.
4. You will receive a SMS for confrmation from the control panel.
Other SMS Notifcations
Yo u will receive SMS for reminding you:
1. When the control panel and sensors are in low battery, the 1st stored phone number
will receive a SMS.
2. When the AC power of control panel fails or restores, the 1st stored phone number
will receive a SMS.
3. When the tamper switch of sensors trigger an alarm, all the stored phone numbers
will receive a SMS.
15
16
