8
Operating Altitude
7000ft. (2000) meters maximum.
Weight
255g
Size
150mm x 70mm x 48mm
Safety
For
indoor
use
and
in
accordance
with
Overvoltage
Category II, Pollution Degree 2.
Category II includes local level,
appliance, portable equipment,
etc., with transient overvoltages
less than Overvoltage Category
III.
BATTERY INSTALLATION
WARNING
: To avoid electric shock, disconnect the test
leads from any source of voltage before removing the
battery door.
1. Disconnect the test leads from the meter.
2. Open the battery door by loosening the screw using a
Phillips head screwdriver.
3. Insert the battery into battery holder, observing the
correct polarity.
4. Put the battery door back in place. Secure with the
screw.
WARNING:
To avoid electric shock, do not operate the
meter until the battery door is in place and fastened
securely.
NOTE
: If your meter does not work properly, check the fuses
and batteries to make sure that they are still good and that
