Ziatech Corporation zPM11D-2, Руководство по оборудованию

Страница: 35 / 94

DOS Drivers and Utilities
22
To completely reconfigure TurboDLDClassic using Panacea's defaults,
1. Delete DLDSETUP.DAT from the \ACAD\DRV sub-directory.
2. Follow the TurboDLDClassic Configuration instructions earlier in this chapter.
AutoCAD Release 11
If you need to make changes to your Release 11 TurboDLDClassic configuration,
1. Select option 5, Configure AutoCAD from the AutoCAD main menu.
2. From the configuration menu, select option 3, Configure Video Display.
3. Answer
no
to the Select a new video driver... prompt to start the TurboDLDClassic configuration
program.
4. Change the desired driver options.
5. Save and Exit to return to the AutoCAD configuration menu.
6. Open or begin a new drawing.
To completely reconfigure TurboDLDClassic using Panacea's defaults,
1. Delete DLDSETUP.DAT from the TURBODLD sub-directory.
2. Follow the TurboDLDClassic Configuration instructions earlier in this chapter.
Configuring an AutoCAD 11 Environment
During the TurboDLDClassic installation process, a FASTACAD.BAT file is created and placed into
the TURBODLD sub-directory. FASTACAD.BAT contains four lines that set four separate
environment variables:
•
DLDCFG - used by TurboDLDClassic to find all of its configuration files
•
DSPADI, RCPADI, and RDPADI - used by AutoCAD, 3D Studio, and AutoShade 2 with
RenderMan, respectively, to find the driver file.
FASTACAD.BAT must be run prior to starting AutoCAD R11 and needs to be run only once per
system boot. For automatic loading of the environment variables, you may add FASTACAD.BAT to
the AUTOEXEC.BAT file or an AutoCAD startup batch file. To add FASTACAD.BAT to your
AUTOEXEC.BAT file, insert the line:
CALL D:\TURBODLD\FASTACAD
anywhere in the file. The above example assumes that FASTACAD.BAT resides in a sub-directory on
drive D: called \TURBODLD.
If you do not wish to put FASTACAD in your AUTOEXEC.BAT file, you may put it in a batch file that
also starts AutoCAD, or simply remember to run the file before starting AutoCAD.
If you get the message "Out of Environment Space" when you run FASTACAD.BAT, you need to
enlarge your system's environment. This is accomplished by adding the following line to your
CONFIG.SYS file:
SHELL=C:\COMMAND.COM /P /E:768
The /E:768 specifies an environment size of 768 bytes. Change this number as appropriate. Reboot
after modifying your CONFIG.SYS file in order for the changes to take effect.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com