Ziatech Corporation zPM11D-2, Руководство по оборудованию

Страница: 34 / 94

DOS Drivers and Utilities
21
•
Regen Mode
- Fast Regen mode stores the AutoCAD drawing until the Display List is created, and then
displays it, all at once.
- Incremental mode displays the drawing in "chunks" as the display list is created. The Fast mode
causes Regens to process approximately 5%-10% faster than the incremental.
Neither mode changes memory requirements.
After All Options Have Been Set
1. Use the arrow keys to scroll down to the Save and Exit option and then press the
[Enter]
key to
continue.
2. Configure the AutoCAD screen display characteristics and type
[Y]
to accept the changes.
3. Exit to the AutoCAD drawing editor to begin using TurboDLDClassic. If you are reconfiguring
AutoCAD, and currently have a drawing loaded, you must exit the drawing and reload the drawing.
The last step in setting up TurboDLDClassic is to configure the colors for AutoCAD.
1. From the AutoCAD Command Line, type
DLDCOLOR[Enter]
, to start CustomColors,
TurboDLDClassic 's color configuration utility.
2. Make any desired color changes.
3. Save the new color palette, and then exit to return to the drawing editor.
Verifying Your TurboDLDClassic Installation
To verify that TurboDLDClassic is running and installed correctly, follow one of these two simple
tests.
•
If you have the AutoCAD side menu enabled, look for the Panacea Logo in the lower right-hand
corner.
•
If you are running AutoCAD without a side menu, type
DLDVER[Enter]
at the AutoCAD
command prompt. If TurboDLDClassic is loaded and running, this command should return your
current version and serial number.
Reconfiguring TurboDLDClassic
To reconfigure TurboDLDClassic, follow the instructions in the following topics for your version of
AutoCAD, Release 12 or Release 11.
AutoCAD Release 12
If you need to make changes to your Release 12 TurboDLDClassic configuration,
1. Type
CONFIG[Enter]
at the AutoCAD command prompt or use
ACAD -R[Enter]
when
starting the program.
2. Select option 3, Configure Video Display.
3. Answer
No[Enter]
to the Select a new videodriver... prompt to start the TurboDLDClassic
configuration program.
4. Make the desired changes to the driver and then Save and Exit to continue to the AutoCAD
drawing editor.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com