Zhone TNE1544, Руководство по установке

Страница: 4 / 26

4
Introduction to the TNE1544 and TNE1584
Zhone's TNE1544 and TNE1584 are loop bonding network extenders for Zhone's
12000 and 4000 IP Broadband Loop Carriers that provide up to 6 Mbps (TNE1544) or
12 Mbps (TNE1584) of symmetrical bandwidth using T1 lines.
The TNE1544 features four T1 ports, and the TNE1584 eight T1 ports, each capable of
up to 1.5 Mbps bandwidth. When used with any Zhone loop bonding compatible
product, one to eight ports may be used to deliver high-speed bandwidth at any given
distance. Zhone's loop bonded technology provides automatic load balancing and fail-
over for optimum redundancy and data throughput. In addition the TNE1544 and
TNE1584 support repeaters installed on the T1 loop, ensuring maximum distance and
flexibility.
The TNE1544 and TNE1584 can be connected to any combination of T1 uplink
interface modules, micro interface modules, and network extenders, so long as every
connection pairs a provider and a subscriber unit.
Provider and Subscriber Defaults
The following table highlights the differences between provider and subscriber units.
Table 1. Unit Defaults by Type
Feature Provider Unit Subscriber Unit
Default IP Address 192.168.254.252 192.168.254.251
Out of Band Management Over Ethernet Ports Over T1 Ports
Inband Management Over T1 Ports Over Ethernet Ports
Response to Broadcast ARP
Request by IP Address Unit answers. Unit does not answer on T1
ports; answers only to ARP
request on Ethernet ports
Package Contents
Unpack and Inspect the network extender. If there is any visible damage, do not
attempt to connect the device. Contact your sales or service provider.
Release Notes
Before installing your network extender, review the release notes for your
model. These are available on the “Service and Support” page under the
documentation heading at the Zhone website.