Zhone 6738, Руководство пользователя

Страница: 64 / 151

ZHONG 6738 User Manual
58
APN: APN (Access Point Name) is used to identify the service type. Enter
the APN provided by your 3G ISP.
Dial Number: Enter the dial number provided by your 3G ISP.
Idle time (in sec.): If no traffic for the preset time, the 3G will disconnect
automatically.
Dial on demand : Within the preset minutes, if the modem does not detect
the flow of the user continuously, the modem automatically stops the 3G
connection. Once it detects the flow (like access to a webpage), the modem
restarts the 3G dialup.
Dial Delay (in sec.) : The 3G delays dial after the DSL is disconnected.
Default WAN Connection Select : You can select DSL or ETHERNET or 3G
from the drop-down list.
WAN back mechanism : The 3G connection is the backup for the DSL
connection.
- DSL : If the DSL is disconnected, the 3G starts to dial.
- IP connectivity : If the system fails to ping the specified IP address, the
3G starts to dial.
After finishing setting, click the Apply/Save button to save the settings.
You may also click the auto setting button to automatically configure the 3G
connection.
Note:
When there is no DSL WAN connection, insert the 3G network card, and then
system will perform dial-up automatically. If the DSL WAN connection and the
3G connection coexist, the DSL WAN connection takes priority over the 3G
connection. When the DSL WAN connection starts to perform dial-up, the 3G
connection will be disconnected. If the DSL WAN connection has established,
you may manually to perform 3G dial-up, and then the DSL WAN connection
will be disconnected.
5.3.4 Ethernet Mode
Choose Advanced Setup > Ethernet Mode , and the following page appears.