4929-A2-ZN20-30
4929 DSLAM Installation and User’s Guide
81
SNMP I
NTERFACE
Overview
The 4900 Series DSLAM can be managed using the Simple Network
Management Protocol (SNMP).
This implementation uses a portion of SNMP v1.0: the MIB-II System Group
and Interfaces Group of OIDs. SNMP uses MIBs (Management Information
Bases) sanctioned by the IETF (Internet Engineering Task Force). MIBs are
composed of OIDs (Object Identifiers), each of which represents a system
configuration or request for data.
You will not be able to manage your DSLAM via SNMP until you have set
the unit IP address, subnet mask, and default gateway. See
Management
Configuration
in Chapter 5,
Configuration Using the NMS
or
Using the CLI
to Establish Inband Management
in Chapter 6,
Command Line Interface
.
Downloading MIBs
You must have a MIB browser installed on your PC in order to utilize the
Management Information Base.
1
Launch your MIB browser and perform any necessary program
configurations. Refer to your MIB browser user manual for further
information.
2
Download the MIBs from the Zhone website. Refer to your MIB browser
user manual for instructions on how to compile the OIDs into your MIB
browser.
Содержание 4929 DSLAM
