Zhone 4929 DSLAM, Инструкция по установке и эксплуатации

Страница: 48 / 96

Configuration Using the NMS
48
4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30
2 In the Add Ports drop-down list, select All or a group of ports. To select
multiple ports, hold the Ctrl key while clicking on your selections.
3 Select or enter the following parameters:
Parameter Description
Reset the IP Range rules
to default parameters
Click in this box to reset IP Range rules when
the Submit button is clicked on.
Global Configuration IP
Range Rule
Specify Add, Delete, or No Set to add a rule,
delete a rule, or perform no action when the
Submit button is clicked on.
Activate Specify whether the rule you are adding is
active.
IP Range Specify the range of IP addresses that constitutes
a match for this rule.
Allow Tag/Untag on
Ingress Pkt.
Specify tag or untag. Tag indicates that ingress
packets already matched to the IP Rule must
have a VLAN tag to be further considered;
packets without a VLAN tag will be dropped.
Untag indicates that ingress packets already
matched to the IP Rule cannot have a VLAN tag
to be further considered; packets with a VLAN
tag will be dropped.
VLAN Specify a VLAN ID range. For each Global IP
Range Rule, if you selected Tag for Allow Tag/
Untag, the VLAN field should specify either an
acceptable single VLAN, or an acceptable
VLAN Range, for VLAN tags on ingress
packets. If you selected Untag, the VLAN field
should specify a single VLAN only if you intend
to have a VLAN tag added to packets; if you do
not intend to have a VLAN tag added to packets,
the VLAN field should be left at the 0 - 0
default.
Add VLAN to Ingress
Pkt.
Specify whether the VLAN ID should be added
to ingress packets.
Priority Specify the priority to be used when adding a
configured VLAN ID to a packet.