12
How to Install and Use
Motion Sensor Control
① Motion sensor of the roll axis is off as default. To turn it on, go to “Settings
Menu” and select the setting for the follow speed of motion sensor.
② When the motion sensor is turned on, the stabilizer enters locking mode
automatically.
③ To protect the camera when using the motion sensor, the tilt axis control
range is +135 ° ~-60 ° ; the roll axis control range is ±45 ° ; the pan axis
control range is 360° .
As the image shown below, single press the F1 button to enable motion sensor
control and control the stabilizer movement by moving the Visual Controller VC100.
1. Before using, make sure the image transmission transmitter, camera, and
stabilizer are correctly connected.
2. Before using, make sure the Visual Controller VC100 has successfully performed
Wi-Fi pairing with the image transmission transmitter.
3. Connect the stabilizer and the image transmission transmitter correctly and power
on, select the "Camera Settings" in the stabilizer menu and select "Extension
Port". The connection is successful when the stabilizer connection status on the
Visual Controller VC100 monitor displays Single press F1 to enter motion
sensor control. Single press again to exit.
