Zhermack dune 2, Инструкция по эксплуатации и техническому обслуживанию

Страница: 19 / 36

19 of 36
MAINTENANCE AND USE MANUAL
DUNE
6.3.1
Worktops
The sandblasting
DUNE
equipment
has been designed for use on a rigid worktop
parallel to the floor.
Suitable worktops include service furniture
(where the operator is standing) or modelling
tables (where work is done sitting down).
All worktops must be checked for stability.
6.4
CONNECTING UP TO THE POWER SUPPLY
The user must provide a power connection with relative socket near the equipment installation
point. The user must also install an adequate electrical circuit breaker upstream from the socket
as well as efficacious overload/indirect contact safety devices.
Connection is effected via the safety plug (16A, in compliance with European standards) at the
end of the power lead: this must be inserted in the mains socket.
When connecting check:
• that mains voltage and frequency are as indicated on the identification plate (incorrect power
supply voltage may damage the equipment).
• that the mains supply has a proper, efficient earth connection.
It is forbidden to tamper with the power lead and its plug. When replacing them
owing to damage and/or wear please contact an Authorised Service Centre.
A proper earth connection is compulsory. Should it temporarily be
necessary to use an extension lead the latter must comply with the
standards in force in the country of use.